Cart 0
Devcon 10110 Plastic Steel Putty (A) 1LB

Devcon 10110 Plastic Steel Putty (A) 1LB

Devcon 10110 Plastic Steel® is the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible.

Key Features : 

  • Bonds to most metals, concrete and some plastics
  • Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted
  • Excellent resistance to oil, gasoline, water and many chemicals
  • Listed under NSN Stock #8030-00-903-6545; #8030-00-962-4430
  • Open Time: 45 minutes
  • Color: Gray
  • Mix Ratio: 2.5:1

Areas of application

  • Patching and repairing areas where welding or brazing would be undesirable or impossible
  • Repair of worn or fatigued metals
  • Patching of castings
  • Rebuilding pump and valve bodies
  • Rebuilding bearing journals and races

Specification

  • Physical State Appearance: Paste
  • Color: Dark Gray
  • Odor: Slight. odor
  • Boiling Point: >500°F (260°C)
  • Melting Point: Not determined
  • Specific Gravity: 2.8
  • Solubility: negligible
  • Vapor Density: >1 (air = 1)
  • Vapor Pressure: 0.03 mmHg @171°F
  • Percent Volatile: 0
  • Evaporation Rate: <<1 (butyl acetate = 1)
  • pH: Neutral
  • Molecular Formula: Mixture
  • Molecular Weight: Mixture
  • Flash Point: >400°F (204.4°C)
  • Flash Point Method: Pensky-Martens Closed Cup
  • Lower Flammable/Explosive Limit: Not determined
  • Upper Flammable/Explosive Limit: Not determined
  • Auto Ignition Temperature: Not determined
  • VOC Content: 0 g/L

MADE IN USA

PACKING 1LB PER KIT

DV10110 Technical Data Sheet.pdf

DV10110 Safety Data Sheet.pdf

https://itwperformancepolymers.com/products/devcon/metal-rebuilding-repair/devcon-plastic-steel-putty-a/